| DESIGN |
Air gap design |
| RATED POWERS |
Single-phase 0.10 – 10 kVAr or three-phase 0.5 – 100 kVAr generation. |
| RATED VOLTAGE |
230 VAC ….. 1000 VAC |
| NOMINAL FREQUENCY |
50Hz (60Hz optional) |
| REACTOR FACTOR |
p= 100% |
| INDUCTIVITY TOLERANCE |
± 5% |
| MAGNETIC CIRCUIT |
High magnetic permeability 0.35 mm silica lamination |
| WINDINGS |
Electrolytic copper or aluminum coil wire – foil |
| CONNECTION |
Transformer terminal, Rail terminal, SKP lug, copper busbar |
| PROTECTION (ELECTRIC) |
120 °C for each phase 1 NC contact thermistor |
| INSULATION TEST VOLTAGE |
3000 VAC (Between the windings and the sheet core) |
| PROTECTION CLASS |
IP 00 (Installation in a cabinet suitable for the desired protection class upon request) |
| INSULATION CLASS |
Class 1, optionally F 155 °C or H 180 °C |
| THERMAL CLASS |
Ta 55 °C / F or Ta 60 °C / H |
| IMPREGNATION |
F or H class varnish under vacuum upon request |
| COOLING |
Natural T40, fan cooling is recommended. |
| RELATIVE HUMIDITY |
95% Non-Condensing (DIN 40040) |
| WORKING HEIGHT |
0 – 2000 meters |
| WORKING ENVIRONMENT TEMPERATURE |
-10 °C ….. +40 °C |
| STORAGE TEMPERATURE |
-10 °C ….. +70 °C |
| PRODUCTION SUITABLE FOR NEEDS |
It is possible to design according to the voltage and power value of your energy system. |
